1987 Yamaha YZ125 Specifications and Specs
Specifications and workshop reference information for the 1987 Yamaha YZ125, including engine, chassis, service data and setup details.
Note: Specs are compiled from factory data, manuals and owner feedback. Bikes vary — if yours is different, jump into the forum and share it.
General Specifications
| Engine Type | Liquid-cooled 2-stroke single, reed valve, YPVS |
| Displacement | 124 cc |
| Bore × Stroke | 56.0 × 50.6 mm |
| Compression Ratio | ~8.8–10.6:1 |
| Maximum Power | ~33–35 hp |
| Maximum Torque | N/A |
| Carburetor | Mikuni VM34SS | Replacement Options |
| Lubrication | Premix |
| Fuel Mix Ratio | ~32:1 | Premix Calculator |
| Ignition | CDI magneto |
| Spark Plug | NGK BR9EG |
| Spark Plug Gap | 0.5–0.6 mm |
Transmission
| Transmission Type | 6-speed constant mesh |
| Clutch | Wet multi-plate |
| Primary Reduction | ~3.409 |
| Final Reduction | ~3.714 (13T / 48T) |
| Overall Reduction | N/A |
Dimensions
| Overall Length | ~2150 mm |
| Overall Width | ~820 mm |
| Overall Height | ~1240 mm |
| Wheelbase | ~1450 mm |
| Ground Clearance | ~340 mm |
| Fuel Tank Capacity | ~8.5 L |
| Bearing Sizes |
Bearing Finder |
Chassis
| Frame Type | Steel single downtube |
| Caster Angle | ~27.5° |
| Trail | ~115 mm |
| Front Suspension | Kayaba telescopic forks (cartridge type) | Fork Oil Levels |
| Rear Suspension | Monocross rising-rate linkage |
| Front Suspension Travel | ~305 mm |
| Rear Suspension Travel | ~315 mm |
Brakes & Wheels
125cc Other Specs
Community
VMX Owners Forum
Discuss vintage motocross bikes, restorations, tuning and riding.
