1981 SWM 250 RS Specifications and Specs
Specifications and workshop reference information for the 1981 SWM 250-RS, including engine, chassis, service data and setup details.
Note: Specs are compiled from factory data, manuals and owner feedback. Bikes vary — if yours is different, jump into the forum and share it.
General Specifications
| Engine Type | Single-cylinder, two-stroke (Rotax) |
| Displacement | 246 cc |
| Bore × Stroke | 70 × 64 mm |
| Compression Ratio | Approx. 11.5:1 |
| Maximum Power | ~32 hp |
| Maximum Torque | |
| Carburetor | Bing 36 mm | Replacement Options |
| Lubrication | Premix |
| Fuel Mix Ratio | 40:1 | Premix Calculator |
| Ignition | Motoplat |
| Spark Plug | NGK equivalent |
| Spark Plug Gap | 0.5 – 0.6 mm |
Transmission
| Transmission Type | 6-speed constant mesh |
| Clutch | Wet multi-plate |
Dimensions
Chassis
| Frame Type | Steel, single shock |
| Front Suspension | Marzocchi telescopic forks | Fork Oil Levels |
| Rear Suspension | Single shock (Öhlins) |
| Front Suspension Travel | 260 mm |
| Rear Suspension Travel | 280 mm |
Brakes & Wheels
250cc Other Specs
Community
VMX Owners Forum
Discuss vintage motocross bikes, restorations, tuning and riding.
